NY Army Guard Engineers Test Skills in Annual “Engineer Rodeo”

By Petty Officer 1st Class Stephanie ButlerAugust 13, 2024

NY Army Guard engineers test skills in annual “Engineer Rodeo”
1 / 8 Show Caption + Hide Caption – New York Army National Guard Soldier Pfc. Keith Alvarado (operating the 10 ton dump truck) and Spec. Joseph Warner (operating the excavator), both assigned to 1156th Engineer Company, worked together to load and dump the truck to practice operating skills. This station was part of the 204th Engineer Battalion, 4th annual, engineering rodeo in Walton, NY, on August 10, 2024. (U.S. Army National Guard photo by Stephanie Butler) (Photo Credit: Petty Officer 1st Class Stephanie Butler) VIEW ORIGINAL
204th Engineer Battalion Engineering Rodeo
2 / 8 Show Caption + Hide Caption – New York Army National Guard Soldier Pfc. Keith Alvarado, 1156th Engineering Company operated a High Mobility Engineer Excavator in attempt to pick up a sports ball off a traffic cone with the bucket and dump the ball in the barrel to test operating skills. This station was part of a five-station engineering rodeo hosted by the 204th Engineering Battalion in Walton, NY, on August 10, 2024. (U.S. Army National Guard photo by Stephanie Butler) (Photo Credit: Petty Officer 1st Class Stephanie Butler) VIEW ORIGINAL
204th Engineer Battalion Engineering Rodeo
3 / 8 Show Caption + Hide Caption – New York Army National Guard Soldier Pfc. Anthony Ricottilli, assigned to 1156th Engineering Company, unchained grader from the M870 trailer as a part of a training exercise. This station was part of a five- station engineering rodeo hosted by the 204th Engineering Battalion in Walton, NY, on August 10, 2024. (U.S. Army National Guard photo by Stephanie Butler) (Photo Credit: Petty Officer 1st Class Stephanie Butler) VIEW ORIGINAL
204th Engineer Battalion Engineering Rodeo
4 / 8 Show Caption + Hide Caption – New York Army National Guard Soldier Spec. Daniel Sgobbo, assigned to 1156th Engineering Company, operated M870 trailer controls after unloading the grader from the trailer, while being graded by Sgt. Daniel Goodell. This station was part of a five- station engineering rodeo hosted by the 204th Engineering Battalion in Walton, NY, on August 10, 2024. (U.S. Army National Guard photo by Stephanie Butler) (Photo Credit: Petty Officer 1st Class Stephanie Butler) VIEW ORIGINAL
204th Engineer Battalion Engineering Rodeo
5 / 8 Show Caption + Hide Caption – New York Army National Guard Soldier Pfc. Anthony Ricottilli, assigned to 1156th Engineering Company, unchained grader from the M870 trailer as a part of a training exercise. This station was part of a five- station engineering rodeo hosted by the 204th Engineering Battalion in Walton, NY, on August 10, 2024. (U.S. Army National Guard photo by Stephanie Butler) (Photo Credit: Petty Officer 1st Class Stephanie Butler) VIEW ORIGINAL
204th Engineer Battalion Engineering Rodeo
6 / 8 Show Caption + Hide Caption – New York Army National Guard Soldiers from the 1156th Engineering Company and 827th Engineering Company work together to unhook M870 trailer, as part of a training exercise. This station was part of a five-station engineering rodeo hosted by the 204th Engineering Battalion in Walton, NY, on August 10, 2024. (U.S. Army National Guard photo by Stephanie Butler) (Photo Credit: Petty Officer 1st Class Stephanie Butler) VIEW ORIGINAL
204th Engineer Battalion Engineering Rodeo
7 / 8 Show Caption + Hide Caption – New York Army National Guard Soldiers Pfc. Anthony Ricottilli and Spec. Daniel Sgobbo, assigned to 1156th Engineering Company, use controls to hook up M870 trailer while being graded by Sgt. Daniel Goodell, 827th Engineering Company. This station was part of a 5 station engineering rodeo hosted by the 204th Engineering Battalion in Walton, NY, on August 10, 2024. (U.S. Army National Guard photo by Stephanie Butler) (Photo Credit: Petty Officer 1st Class Stephanie Butler) VIEW ORIGINAL
204th Engineer Battalion Engineering Rodeo
8 / 8 Show Caption + Hide Caption – New York Army National Guard Soldier Pfc. Keith Alvarado, 1156th Engineering Company operated a High Mobility Engineer Excavator in attempt to pick up a sports ball off a traffic cone with the bucket and dump the ball in the barrel to test operating skills. This station was part of a five- station engineering rodeo hosted by the 204th Engineering Battalion in Walton, NY, on August 10, 2024. (U.S. Army National Guard photo by Stephanie Butler) (Photo Credit: Eric Durr) VIEW ORIGINAL

Walton, New York – Thirty-four New York Army National Guard engineers from across the state spent August 10 testing their engineering equipment skills, during the 204th Engineer Battalion’s Fourth Annual Engineer Rodeo.

Soldiers from the battalion’s three companies and the headquarters company tested their ability to load gravel into a dump truck, pilot a skid steer, load a grader onto a trailer, and back up a truck/trailer combination.

The two-Soldier teams even got a chance to scoop up and dunk a ball using the High Mobility Engineer Excavator, a high-speed, four-wheel drive, armored tractor with a front end loader and a backhoe.

The rodeo is both fun and good training, said Spec. Joseph Warner, a member of the 1156th Engineer Company.

“I have participated the last three years, it is good to see everyone in the different units, it is great to learn from those who are good on the equipment,” Warner said. “I like seeing them get better each year, learning with exercises like this.”

The rodeo also offers a chance to get members of the far-flung battalion together in one place, said Major Kevin O’Reilly, the battalion executive officer.

“Our Battalion is spread across New York State from Buffalo to Westchester,” he said.

“This event is an opportunity to bring Soldiers together from different units, backgrounds, and cultures, and have them build a mutual respect for Soldiers from other companies, while also trying to prove their company is the best,” O’Reilly added.

Each year a different company hosts the competition, O’Reilly explained. For 2024 this was the 827th Engineer Company which is headquartered in Walton.

“The hosting company selects the competitive events and sets up the grading criteria,” O’Reilly said.

For this year’s rodeo, 827th also had the limitation of selecting events that can be accomplished within the confines of the armory motor pool, he added.

The events selected focus on core skills and equipment that all the units possess which keeps a level playing field, O’Reilly said.

The rodeo’s challenges focus on real world skills, and real world obstacles engineers must deal with, according to Capt. Christopher Monteferante, the commander of the 827th.

For example, we need to make sure that if a Soldier is driving the M-984 heavy truck, known as a HEMTT, with a trailer in a motor pool, and they have to turn around that they are able to do that, he said.

The five events are always announced three months out, he said.

“Part of it is practicing the technical skills of using the equipment, but it is also reinforcing the need to plan, prepare, rehearse, before the event,” Monteferante said.

“It gives them an opportunity to adapt and make decisions in a safe environment. It also gives them a challenge they may not get perfect, but they can learn from their mistakes to be better in the future,” explained Monteferante.

Pfc. Keith Alvarado, a member of the 1156th Engineer Company, based in Camp Smith near Peekskill, said he valued the chance to learn how to operate the HMEE tractor.

“I had never been inside the HMEE, I had to learn the new machine,” Alvarado said.” It was great to get some stick time, after only a little while the muscle memory comes back.”

Event judges evaluated each event based on the Soldiers ability to follow instructions, take safety precautions, ask permission to proceed at appropriate times, and the time it took to complete each task.

“We hope this is an opportunity for Soldiers to practice the skills they need to be successful in the future,” Monteferante said.

This year, Monteferante’s company won the event.

This was “inspiring” he said, because on August 9, the company was tasked to provide 15 Soldiers to respond to flooding in Stueben County.

“Within an hour of the call we had Soldiers on the road,” he said. “Then the very next day the 827th won the engineering rodeo.”