By ARL Public AffairsMay 1, 2018
ABERDEEN PROVING GROUND, MD. -- Scientists at two major national laboratories have demonstrated a new method for testing explosives stored in weapons stockpiles, a step they say will help reduce accidental detonation and ensure the weapons perform as expected.
Stored small-scale and large-scale explosives, from blasting caps to nuclear weapons, need to be tested regularly for safety, whether those weapons are stored for five years or stockpiled for 30 or more years. When subjected to extreme environmental conditions such as temperatures above 65 degrees Celsius or below negative 20 degrees Celsius, they can become prone to accidental detonation.
But large-scale explosives testing is time-consuming, expensive and poses numerous safety hazards, said Dr. Jennifer L. Gottfried, a researcher at the U.S. Army Research Laboratory.
She and a team of ARL researchers developed a technique for measuring the energy release from small quantities of explosive material by focusing a high-power laser pulse lasting a few nanoseconds, one billionth of a second, on the surface of the explosive.
Since only very small amounts of material, a few thousandths of a gram, are needed for the test, there is no danger of an explosion occurring and the test can be safely performed inside the research laboratory.
The laser pulse, which takes the place of an actual detonation event, violently rips apart the explosive molecules and forms a laser-induced plasma. Temperatures in the plasma rapidly reach more than 10,000, or 17,540 degrees F, creating a shock wave that expands into the surrounding air.
The more powerful the explosive is, the hotter the plasma becomes and the faster the shock wave moves. By measuring the speed of the shock wave, the energy release from the explosive can be determined.
This technique was recently used to test an explosive formulation of interest to researchers at Sandia National Laboratories who study the properties of aged-energetic materials.
This breakthrough is described in detail in the soon-to-appear paper "Laboratory-scale investigation of the influence of aging on the performance and sensitivity of an explosive containing ε-CL-20" by Jennifer L. Gottfried, Rose A. Pesce-Rodriguez, Darcie Farrow and Jennifer Dellinger in the journal Propellants, Explosives and Pyrotechnics (see related links).
"Our results successfully demonstrated that an explosive formulation based on the military's most powerful explosive, CL-20, not only becomes less effective when stored at high temperatures, it also becomes easier to ignite," Gottfried said. "This increases the likelihood that a weapon containing this explosive could be accidently discharged, creating a significant safety hazard for our Soldiers."
The new laser-based technique developed at ARL will enable the Department of Defense and the Department of Energy to cheaply and easily monitor the quality of their weapons stockpiles to ensure that the weapons Soldiers are using are safe and effective.
"Testing stockpiles is a continual process and is important for current stockpiles as well as older ones. The samples in this study were only aged for five years and still showed decreased performance and increased sensitivity," Gottfried said.
The U.S. Army Research Laboratory is part of the U.S. Army Research, Development and Engineering Command, which has the mission to provide innovative research, development and engineering to produce capabilities that provide decisive overmatch to the Army against the complexities of the current and future operating environments in support of the joint warfighter and the nation. RDECOM is a major subordinate command of the U.S. Army Materiel Command.