U.S. Army Soldiers assigned to 1st Battalion, 3rd Field...
U.S. Army Soldiers assigned to the 2nd Battalion, 11th...
Introduction
Operating in the Pacific requires units to approach maintenance support as a strategic problem, even at the brigade combat team level. Vast distances, limited lift, and constrained vessel space mean units cannot always deploy with a full bench stock, supply stockage list, or authorized stockage list. In many cases, formations move across the Pacific with only the most essential Class IX repair parts. Large portions of the region also lack mature Class IX distribution infrastructure, and only recently have select locations begun to carry theater-authorized stockage lists. As a result, when equipment fails forward, getting repair parts to the point of need becomes an immediate and often frustrating challenge.
This challenge is compounded when strategic stocks are already strained. At the same time, the distance from depot-level capability makes it difficult to obtain timely pass-back maintenance support from enterprise maintainers. Faced with long-lead-time parts and operational pressure, tactical units naturally begin to consider forward fabrication as a solution. Tele-maintenance is an emerging capability at the tactical level that is reshaping how units approach maintenance in contested, distributed environments. Rather than defaulting to forward fabrication or extended wait times for parts, it enables formations to deliberately evaluate repair options, weigh risk, and determine when temporary repair, permanent repair, or fabrication is the most effective course of action.
This article outlines how tele-maintenance provides rapid access to enterprise expertise to diagnose root causes of equipment malfunction, support battle damage assessment and recovery, assess the availability of critical Class IX repair parts across the Army, and inform commanders and maintainers on when fabrication is appropriate.
The Problem
The 2nd Mobile Brigade Combat Team (2MBCT), 25th Infantry Division, recently encountered this problem firsthand when an M119 howitzer became “not mission capable” (NMC) in the Philippines during Operation Pacific Pathways 2025. The failure involved the cannon’s recuperator and its associated bracket assembly. Our initial effort focused on legitimate maintenance actions: salvaging any NMC parts that could be repaired, identifying available Class IX stocks in Global Combat Support System–Army, and coordinating movement of replacement components into the Philippines. Operational reality set in quickly, however. There were (and still are) no authorized recuperator repair kits, special tools, or approved procedures for field-level maintenance on that component. By design and regulation, all recuperator work is depot level. Furthermore, the bracket assembly was also damaged beyond repair.
Searching Army wide for Class IX stocks of these parts was disappointing. National-level shortages limited our options. Our formation was not the priority for release of those assets, and even with approval, the parts would not have arrived in the Philippines in time to participate in the rest of Pacific Pathways. Only after confronting these timelines and constraints did forward fabrication emerge as a potential course of action. Commanders understandably pressed for options to accelerate a return to service, and leaders and maintainers began asking whether the bracket or recuperator could be fabricated forward using available division manufacturing assets. At the tactical level, however, neither the forward maintainers nor the sustainment leadership had sufficient experience with recuperator or bracket repair to fully understand what was technically feasible, legally permissible, or operationally safe.
Rather than proceed on assumptions, we engaged our Army field support battalion to establish an enterprise tele-maintenance event. Through that engagement, we shared detailed video, photographs, and system data with program offices, lifecycle management commands, and engineering experts across the maintenance enterprise. The objective was twofold: to gain a clearer understanding of the root cause of gun failure and repair options, and to determine whether strategic Class IX stockage or reprioritization could support the brigade. That collective assessment brought clarity quickly. The enterprise assessment demonstrated that forward fabrication was not viable due to a convergence of technical, statutory, and capability limitations. Tele-maintenance enabled leaders and maintainers to clearly understand those constraints clearly and to avoid pursuing unsafe or unauthorized repair paths.
Technical Authority and Data Limitations
The initial instinct to fabricate the damaged bracket did not survive detailed scrutiny. While the bracket appeared workable on the surface and could theoretically be reverse engineered, 2MBCT lacked the technical authority and certified data required to fabricate safely. The computer-aided design file was owned by the program office and not initially releasable, meaning any locally produced component would rely on reverse engineering the part rather than approved, specific technical data.
Material Science, System Balance, and First Article Testing
Material considerations made forward fabrication particularly risky. The original bracket was cast aluminum, while a fabricated replacement would likely have been machined from solid T6360 aluminum, increasing its strength by approximately 15% to 20%. Although this may appear advantageous, artillery systems are engineered as balanced assemblies in which components are designed to fail predictably and protect adjacent parts. Increasing the strength of a single component alters load paths and redistributes stress to seals, welds, and other interfaces, accelerating wear or inducing failure elsewhere in the system.
Even if a fabricated part appeared dimensionally correct, the unit could not conduct the multilayered first article testing (FAT) required before installation. FAT validates fit, system interaction under recoil forces, heat, cyclic stress, and repeated firing. Without that testing, a fabricated component, particularly one stronger than the original design, could introduce unsafe conditions during live firing. Tele-maintenance enabled enterprise engineers to explain these system-level risks clearly before an untested component was installed, preventing the creation of a hidden hazard within the weapon system.
Forward Capability Constraints
Even if forward fabrication had been technically permissible, executing it at the tactical level remained impractical. Allied trades capability within a brigade combat team is extremely limited by design, and deploying an allied trades team to support a single battalion for an extended period would have been operationally inefficient and unsustainable. For a light formation operating in the Philippines, moving a mobile welding support system with the required welding equipment, power generation, and consumables would have imposed a significant burden on the unit deployment list and competed directly with combat-essential equipment for scarce sealift space.
More fundamentally, effective allied trades operations require a dedicated support area with space, power, security, and sustainment depth. That infrastructure more closely resembles a brigade support area than a forward logistics element operating thousands of miles away from its company and battalion in Hawaii. In this case, 2MBCT simply did not possess the forward capability to safely execute fabrication at scale. This reality reinforced a broader lesson for Pacific operations: additive manufacturing and forward fabrication are not substitutes for echeloned sustainment; they are enterprise tools that require the right conditions to be employed effectively.
Depot-Level by Design: The Recuperator
The recuperator itself eliminated any remaining ambiguity. By statute and design, it was a depot-level component. The technical data package was not releasable; even if it had been, 2MBCT could not have reproduced pressure-bearing seals. Compounding this reality, national-level prioritization of limited recuperator stocks made near-term replacement unlikely.
Tele-Maintenance as the Decisive Enabler
It was at this point that tele-maintenance demonstrated its value most clearly. The Army did not have to deploy a depot team, retrograde the weapon system, or concentrate personnel and equipment unnecessarily. Instead, forward maintainers connected with experts from program offices, lifecycle management commands, and seasoned armament maintainers across the Army. Through shared video, imagery, and technical context, enterprise experts provided guidance on what actions were feasible. The outcome was not a dramatic forward repair, but something far more valuable: clarity, safety, and realistic expectations that allowed commanders to make informed decisions.
The clarity provided through tele-maintenance prevented reactive, assumption-driven maintenance decisions at the tactical edge. It removed pressure from maintainers to improvise solutions outside their authority or capability and gave commanders a precise understanding of what was broken, what options truly existed, and how operational timelines would be affected. In this context, tele-maintenance functioned as much as a command-and-control tool as it did as a technical one.
Tele-maintenance is not a mechanism to conduct depot-level work remotely. Its value lies in ensuring repairs occur at the correct echelon and that fabrication is pursued only when it is technically sound, legally authorized, and operationally supportable. By allowing enterprise experts to reach forward without physically deploying, tele-maintenance preserves distributed posture, prevents unnecessary retrograde movement, and protects scarce lift and sustainment capacity. These advantages are amplified in the Pacific, where distance, limited infrastructure, host-nation considerations, and constrained strategic lift define the operating environment. Tele-maintenance enables units to remain dispersed across island chains while still accessing enterprise expertise, reducing the need to consolidate personnel or equipment and minimizing additional operational risk.
--------------------
MAJ Sean McLachlan is the deputy G-4 for the 25th Infantry Division and formerly the support operations officer for the 225th Light Support Battalion, 2nd Light Brigade Combat Team, 25th Infantry Division. He graduated from the Virginia Military Institute in 2011. He has also earned master’s degrees in military history from Norwich University and the U.S. Army Command and General Staff College and is a Ph.D. candidate at Liberty University. He is the winner of the 2024 LTG Arthur Gregg Sustainment Leadership Award and the Transportation Corps Field Grade Officer of the Year.
--------------------
This article was published in the winter 2026 issue of Army Sustainment.
RELATED LINKS
The Current issue of Army Sustainment in pdf format
Current Army Sustainment Online Articles
------------------------------------------------------------------------------------------------
Social Sharing