Enhanced grenade lethality: On target even when enemy is concealed

By Eric Kowal, PicatinnySeptember 4, 2014

Enhanced grenade lethality: On target even when enemy is concealed
1 / 4 Show Caption + Hide Caption – (Photo Credit: U.S. Army) VIEW ORIGINAL
Enhanced grenade lethality: On target even when enemy is concealed
2 / 4 Show Caption + Hide Caption – (Photo Credit: U.S. Army) VIEW ORIGINAL
Army Technology Magazine
3 / 4 Show Caption + Hide Caption – (Photo Credit: U.S. Army) VIEW ORIGINAL
Enhanced grenade lethality: On target even when enemy is concealed
4 / 4 Show Caption + Hide Caption – (Photo Credit: U.S. Army) VIEW ORIGINAL

PICATINNY ARSENAL, N.J. (Sept. 4, 2014) -- How does the warfighter launch a grenade at the enemy and ensure that it hits the target if the enemy is defiladed, or concealed, behind natural or artificial obstacles?

According to Steven Gilbert, the solution is simple. Use Small Arms Grenade Munitions, or SAGM.

SAGM is a munitions round that aims to provide warfighters with the capability of shooting a 40-mm low-velocity grenade from an M203 or M320 rifle-mounted grenade launcher with the certainty that, if their target is hiding or behind an object, damage will still be inflicted.

The round more than doubles the lethality of the current 40-mm grenade against defilade targets. It also does not require the user to carry extra weapon accessories, reducing the Soldier's load.

Gilbert is a project officer from the U.S. Army Armament Research, Development and Engineering Center at Picatinny Arsenal, New Jersey.

He and a team of about 10 engineers from the Joint Service Small Arms Program are in the third phase of the SAGM three-phase project.

The project began in 2011. The first phase of the project entailed making the fuze component smaller, while maintaining its functionality using a standard M433 grenade round. Gilbert described the round as being complementary to the XM25. The XM25 is a Counter Defilade Target Engagement System, which has an onboard laser system that determines the distance to the target.

"SAGM is complementary to that. We are not competing against it," Gilbert explained. "The XM25 provides direct fire. SAGM is indirect."

The second phase was to make the fuze "smart" by including sensors, so that the round detonates in what is known as "airburst"-- over and past defilade obstacles that are detected by the sensor.

During this phase, engineers worked to integrate sensors and logic devices that will help to scan and filter the environment and then autonomously airburst the fuze in the ideal spot.

Now, in the third phase, engineers are working to optimize the fuze sensor from phase two and improve its ballistic accuracy, as well as integrate the fuze with a live high-explosive warhead.

"Warfighters currently lack the ability to achieve desired accuracy and incapacitating effects against personnel targets in defilade at ranges from 51 to 500 meters," Gilbert explained.

With this new capability, much like a smart phone, the grenade can perform a task without being told to do so by the user.

Thus, when it is fired, it will recognize its surroundings and can detonate over an obstacle that might conceal the enemy.

The ballistic trajectory of legacy 40-mm ammunition inhibits optimal engagement of personnel threats under cover. For these reasons, engineers are also working to optimize ballistic trajectory and the overall accuracy and effectiveness of the grenade.

"There are three modes of firing," Gilbert said. "Airburst after detecting defilade is the first. Then, the default is point detonation or when it hits the target. Lastly there is a self-destruct feature which decreases collateral damage and reduces unexploded ordnance left on the battlefield or training ranges."

The team successfully demonstrated the Phase Two sensor technology, in November 2013.

"The technology demonstration was conducted at Redstone Arsenal (Alabama) and it was shown that the sensor correctly detected defilade and air-bursted the round behind the defilade. This capability will inflict maximum lethality to any enemy personnel seeking cover behind defilade."

However, the SAGM project is not expected to be in the hands of the Project Manager Ammunition Systems until July 2015.

-----

This article appears in the September/October 2014 issue of Army Technology Magazine, which focuses on lethality. The magazine is available as an electronic download, or print publication. The magazine is an authorized, unofficial publication published under Army Regulation 360-1, for all members of the Department of Defense and the general public.

The Armament Research, Development and Engineering Center is part of the U.S. Army Research, Development and Engineering Command, which has the mission to develop technology and engineering solutions for America's Soldiers.

RDECOM is a major subordinate command of the U.S. Army Materiel Command. AMC is the Army's premier provider of materiel readiness--technology, acquisition support, materiel development, logistics power projection and sustainment--to the total force, across the spectrum of joint military operations. If a Soldier shoots it, drives it, flies it, wears it, eats it or communicates with it, AMC provides it.

Related Documents:

Army Technology Magazine [PDF]

Related Links:

Army Technology Live

Armament Research, Development and Engineering Center

Joint Service Small Arms Program

U.S. Army Materiel Command

XM25 Counter Defilade Target Engagement system may lose 'X' by next August

Picatinny employees honored for improvement in hand grenade safety

Army testing XM-25 'smart' high-explosive weapon for Soldiers

New pivoting coupling brings continuous firepower, cost savings

Army wants 36 more 'Punisher' weapons in 2012

XM25 feedback demonstrates lethality

Picatinny engineer pursues improved hand grenade

Army refines airburst technology, XM25 'Punisher'

Army.mil: Science and Technology News

U.S. Army Research, Development and Engineering Command

STAND-TO!: Squad Overmatch Study